From: Subject: 1 Date: Fri, 9 Aug 2002 07:17:56 -0400 MIME-Version: 1.0 Content-Type: text/html; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable Content-Location: file://C:\WINDOWS\Desktop\ST%20Flyers%20&%20Manuals\STManual80902%20for%20website.htm X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 1

 

 

1.0=20 Introduction:

 

Thank you for purchasing a DigiNet Digital Video = System.=20 This manual will guide you through the setup, installation, and usage of = all the=20 DigiNet systems.

 

Before = proceeding further please make sure to read this manual=20 thoroughly!

 

 

 

 

 

1.3 Front of the=20 system:<= /SPAN>=20

Depending=20 on the model number most DigiNet systems are similar to the following 4U = Chasis

 

 

 

 

 

 

 

 

1.4 Back of the=20 Machine

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2.0   Main Screen or Default=20 Screen:

 

7

 

1

 

4

 

5

 

3

 

2

 

6

 
 

Main=20 Screen

1.      =20 Time and = Date =96=20 Displays current time and date.

2.      =20 Search =96=20 Display search menu to play back, search, and/or save for backup by = date, time,=20 and camera.

3.      =20 Setup =96=20 Display setup menu including settings for hardware, motion, passwords, = screen=20 division, modem, system setup, and site = information.

4.      =20 Storage =96=20 Percentage of space remaining on current drive.

5.      =20 Quit =96 Exit=20 the DigiNet software.

6.      =20 Camera =96=20 Click the numbered buttons to select the cameras to be displayed on the=20 screen.

7.      =20 Screen = Division =96=20 Select the division of the cameras on the display = screen.

 

Display=20 four cameras

Displays=20 6 cameras with one larger image

Displays=20 nine cameras

Displays=20 10 cameras with two larger images

Displays=20 13 cameras with one larger image

Display=20 all 16 cameras

Displays=20 selected screen division without any menu bars (right click to = return to=20 menus)

Displays=20 cameras on quad screen in sequence (1-4, 5-8, 9-12, 13-16).  To return to default = mode click on=20 the screen

3.0  Hardware=20 Setup

Hardware=20 Setup Screen

 

1.      =20 Camera = Setup =96=20 Settings for each camera.

=A7   = [Setup] =96=20 Checkmark to include (enable or disable) camera.

=A7   = [Name] =96=20 Assign a name to each camera.

=A7   = [Sensor] =96=20 Enter a sensor number that will trigger the camera to record if set=20 off.

=A7   = [P/T] =96=20 Checkmark if camera is Pan/Tilt/Zoom.

=A7   = [Type] =96=20 Select the make of the PTZ camera (only available if P/T is checked).

2.      =20 Sensor = Setup (Applicable only if sensors are = available and=20 being used)

=A7   = [Setup] =96=20 Checkmark if using the Auto ON/OFF Time feature.

=A7   = [NC/NO] =96=20 Click button to select type of sensor connection (NC - Closed, NO -=20 Open).

=A7   = [Auto=20 ON/OFF Time] =96=20 Designate time when the sensor is active (default is continuous = 00:00-24:00). If=20 sensor is triggered outside the specified time, it will be ignored.

3.      =20 Control=20 Setup=20 (Applicable only if controls are available and being=20 used)

=A7   = [Setup] =96=20 Checkmark to activate and use specified control.

=A7   = [Name] =96=20 Assign a name to each control.

=A7   = [Auto=20 ON/OFF Time] =96=20 Designate time when the control is active (default is continuous = 00:00-24:00).=20 If sensor is triggered outside the specified time, it will be=20 ignored.

=A7   = [Sensor] =96=20 Specify which sensor is associated with the control (use commas to = separate more=20 than one sensor).

=A7   = [Working=20 sec] =96=20 Enter the length of time (in seconds) that the control is turned on for = when=20 activated by sensor(s) or manually on the display mode=20 screen.

4.      =20 External=20 Monitor =96 If=20 external monitor is being used, checkmark the cameras that are to be = displayed=20 on that monitor. Cameras are displayed in = sequence.

=A7   = [Select=20 Time (sec)] =96=20 Enter the interval (in seconds) between each camera=20 display.

 

 

4.0  Motion=20 Setup

 

5

 

4

 

3

 

2

 

Motion=20 Setup Screen

 

1. Camera:=20 Click=20 on numbered button to define motions settings for selected=20 camera.

2. Target = Zone:=20 Define=20 up to five detection zones per camera for triggering motion=20 recording.

3. Individual = Camera=20 Motion Setting:

=A7        =20 Sensitivity: Adjust=20 the sensitivity in the detection zone by using the scroll=20 arrow.

=A7        =20 Alarm:=20  

=A7        =20 Area=20 Clear: Will=20 clear all detection zones for selected camera.

=A7        =20 Area=20 Draw: Will=20 draw a detection zone covering the whole area for selected=20 camera.

=A7        =20 Brightness=20 / Hue / Contrast:=20 Adjust the brightness, hue and contrast of each selected camera. 

=A7        =20 Color: 

=A7        =20 Default:  Return to the default=20 settings.

4. Recording = Frame rate=20 per Camera (sec): Each=20 camera=92s recording rate is adjustable.

Default:  The default setting is as = followed [4 chan =96 30 fps / camera ~ 8 chan = =96 30 fps /=20 camera ~ 16 chan =96 8 fps / camera].

*If you increase = the speed=20 of a certain camera, the other cameras=92 speed will be decreased with 8 = & 16=20 chan.

5. All Camera = Motion=20 Setting:   

=A7        =20 Area=20 Clear: Will=20 clear all detection zones for all cameras.

=A7        =20 Area=20 Draw: Will=20 draw a detection zone covering the whole area for all=20 cameras.

=A7        =20 Screen=20 size: Set=20 screen size from 160x120, 320x240, and 640, 480.

=A7        =20 Quality: Set=20 screen quality from best, high, normal, low and = lowest.

=A7        =20 Color=20 of Motion Area:=20 Select the color of motion detection area in the display mode between = green or=20 red.

=A7        =20 Full=20 Screen When Motion:=20 Select from multi to full screen when activity is=20 detected.

=A7        =20 Set=20 Quad Rotation Time: 

5.0   Schedule=20 Setup =